Cyclone Update: What the hell was living in this thing?

Upper Playfield Disassembly 1.jpg

Over the weekend, I finally mustered the courage to tear into the upper playfield of the Cyclone. The “upper” playfield is everything beyond the big open area just above the flippers. It also happens to be the part of the playfield that pivots down and into the machine when you lift the playfield. Coincidentally with being the least accessible part of the playfield, it is also the most complex as it is where all the tight shots, loops, ramps, and complex targets are layered together.

Upper Playfield Disassembly 39.jpg

In other words, there really isn’t any way to tear into the upper playfield without pretty much removing all ramps and most plastics from the playfield. That big pile you see in the first image to the left was quickly turned into a pile of ramps, screws, plastic bits, and washers/spacers seen on my work desk to the right.

Upper Playfield Disassembly 43.jpg

The end result can be seen to the left. Most of the toys have been removed and only a handful of plastics need to be pulled to gain access to the grime, lamps, and rubbers hidden underneath the multiple layers of playfield components.

Upper Playfield Disassembly 15.jpg

It has been years since this machine has been cleaned underneath the various ramps and plastics. It may never have been disassembled before. This isn’t terribly surprising given the inconvenience of doing so.

As can be seen in the image on the right, there is a pretty extreme amount of filth that has built up. I’m beginning to think this machine spent a while with the glass off in an open area with lots of wind. There are seeds, lint, cloth, bits of cardboard, etc… all piled up underneath on on the various ramps.

Upper Playfield Disassembly 21.jpg

Likewise, there are areas of the machine covered in drifting piles of either sawdust or paper lint.

Upper Playfield Disassembly 37.jpg

Where there isn’t bits of dirt on the surface, the playfield has deep set grime. Clearly, this machine is in need of a lot more deep scrubbing before it will be restored to my satisfaction.

Yet, despite all this grime, the machine is in just plain awesome shape. There are only a couple of generic plastics that need replacing. All of the unique parts are in excellent to near mint condition.

This is going to be one fine machine once it is properly restored.

1 Comment on "Cyclone Update: What the hell was living in this thing?"

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.